7.5" Y-Link TM Syspension System-XJ

-High Clearance Belly Pan with integrated transfer case skid - gains 1" of ground clearance

-The original bent Y-LinkTM arm - no loss of turning radius

-U-bolt Eliminators for SOA conversion, with new lower shock mounts, gives positive spring capture and built in lift

-Drop track bar system - includes drop bracket and Flex Joint track bar

-Braided stainless brakelines, bumpstops, swaybar disconnects and pitman arm

TREKSTM Offroad Equipment's 5.5" Y-LinkTM long arm suspension system for the Jeep Comanche MJ is a total replacement front suspension with parts included to convert your rear to a SOA configuration ? designed around a singular goal ? turn your Jeep into a performance trail crawling unit that will make you smile; even driving to work on Monday. Shop and compare, you will not find a more extreme production suspension for your MJ on the market. See list of included parts at bottom of page.

Do you want the most from your Jeep? With a Y-LinkTM long arm suspension you have the freedom to take on the most demanding trails. Every component has been thoroughly tested in real world environments and diverse terrain - from rocks, sand, mud to snow in high mountains to the desert and anything between. Get performance from a system that drives BETTER than any lifted Jeep should. No other system offers this advanced performance in one package.

You want durability? All components in this suspension system are built for maximum longevity, user serviceability and terrain conquering in mind. We use 1026 DOM tubing for all of our control arms - 1.75" X .250" for our Y-LinkTM front lower arms and 1.50" X .250" for our upper control arms. All control arms feature 2.50" of adjustability that maintain 1.50" of thread engagement at their maximum length. Fully rebuildable Flex Joints feature races molded from Nylatron GS, a high grade nylon created specifically for bearing applications. Polyurethane bushing assemblies that are greasable are easily repaired - if needed - with replacement bushing halves. CNC equipment is used to cut and form all bracketry which are then carefully jig welded by our crew of experienced welders.

This system will offer you superior stability both on and off road, reduced body roll, and enhanced traction over any other lift kit. Our competition will not want to see a TREKSTM Offroad Equipment suspension system on your Jeep, you can just smile knowing you have a full suspension solution designed by guys who wheel and drive their Jeeps. Intended tire size is 35 X 12.50.

***NOTE: Tires over 35 inch can be used with appropriate fender trimming. The installation of a slip yoke eliminator (SYE) and CV driveshaft is required. Shocks are not included, they are available separately.