JK Front Drive Shaft
There are many different ways to build a drive shaft for the new JK. One method uses an adapter flange which bolts directly to the original pinion flange. This is really not much more than a round flat plate with bolt holes drilled into it and a conventional drive shaft weld yoke welded into the center. This then bolts to the stock pinion flanges. We just don't think this is as ?clean? of a modification as can be done. What if the weld yoke portion breaks? You could have a tough time finding a new one or repairing the old one. There is also a concern with maintaining the accuracy of the part after welding. In addition to this, the center of the universal joint gets pretty far away from the pinion bearing. Excessive overhung load is not a good thing.
We can build either drive shaft in 1310 or 1350 series. Unless you plan on beating the vehicle really hard, we believe the 1310 series front drive shaft would serve most people well. Likewise for the rear drive shaft.
With our version, we?ve elected to make a replacement flange for the differential pinions. These flanges are machined from solid billet steel. We do not believe this flange will never break. We designed this to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
In a 1310 series the drive shaft is $449; a 1350 series price would be $649. The price is the same for either front or rear. These prices are for the complete package including required nuts, bolts, and flanges/yokes. We can supply a good fit by application information only but believe we can get the best fit if you will supply a simple length measurement.
Please click on link below before ordering. There is valuable information you will NEED TO KNOW before you order ANY drive shaft. A little time spent reading this information could save alot of money. Tom Wood's Custom Drive Shafts and 191 Off Road will NOT be held responsible if your custom drive shaft does not fit properly. Please, follow the directions in the link carefully. Measure twice for accuracy!
|
- Item #: TWFJKDS
- Manufacturer: Tom Wood's
- Condition: New
